Blackmagic Design today announced that Suzhou-based SRTVMIX completed remote live production and streaming for online talks between Smart City Expo World Congress (SCEWC) 2021 and Chinese cities using a live production workflow built around ATEM Constellation 8K
Held in Barcelona since 2011, Smart City Expo World Congress (SCEWC) is the international leading event for cities, with a mission to empower cities and collectivize urban innovation across the globe.In addition to the in-person show at the main venue in Barcelona, the SCEWC organizers also produced a digital program that included online interviews with experts and industry leaders from cities around the globe. A production studio was set up on SCEWC 2021’s show floor in Barcelona, where the host talked to interviewees or speakers on site or over the internet.
SRTVMIX was commissioned to mix the feeds between the production studio in Barcelona and speakers in Chinese cities, allowing the studio to handle just the feeds from SRTVMIX in Shanghai, instead of handling too many feeds from various cities at the same time.
“There were 18 video feeds for us to mix including 16 feeds from the Chinese cities and two feeds from Barcelona. Also, because the host in Barcelona spoke English and the speakers in China spoke Mandarin, there was simultaneous interpreting going on. Apart from mixing the video and audio feeds, we also needed to take care of graphics work and the project had to run flawlessly for two days. We chose the ATEM Constellation 8K for its loads of video and audio connections and powerful graphics features as well as reliability,” said Hu Jiazhang, technical director of SRTVMIX.
“With its 40 12G-SDI inputs, we didn’t have to worry about the 18 incoming feeds. The built-in standards converter on each input dramatically minimalized the complexity of our system and saved both the cost of external standards converters and time spent on tests, which I think is why the new ATEM Constellation HD live production switcher with the same built-in standards converters are getting popular with live production pros here,” Hu explained.
The MADI connections on the ATEM Constellation 8K further reduced the complexity and cost by eliminating the need for external audio de-embedders and embedders. “For audio, all we needed to do was get the 18 SDI feeds directly into the ATEM Constellation 8K and connect the MADI out on the switcher to the MADI in on the audio mixer, instead of installing an audio de-embedder for each of the 18 connections,” said Hu.
SRTVMIX also made the most of the two SuperSource processors of the ATEM Constellation 8K to make life much easier. “When a speaker was doing the presentation, we needed to cut between two layouts, with one where the sizes of the speaker box and the presentation slides box were the same and the other layout where the sizes of the boxes were different. We customized the two layouts in the ATEM Software Control ahead of time and assigned them to specific buttons on the ATEM Advanced Control Panel, so we could get the two layouts quickly with just a press of a button. We could have done this with macros too, but with SuperSource the possibility of making mistakes was minimal even when things got hectic, and we were able to add more visual elements to the image so it looked more appealing,” said Hu.
The HyperDeck Studio 4K Pro was used to record the master. “I ordered this recorder as soon as it was available because now more and more clients are asking us to deliver 4K projects in H.265, since it offers high resolution in small sizes,” said Hu. “Another feature I like is the built-in speaker and a monitoring jack. However, as a technical director, the headset I wear is mostly for me to talk to camera operators, and in noisy environments, I often use the Blackmagic Audio Monitor 12G for monitoring.”
Reliability was also crucial to the success of the live production for SCEWC 2021, which was an international event that government officials attended. “I believe reliability is a precondition of live production. Our confidence in Blackmagic Design’s reliability has been built up over our years of use. Our first live production solution was also completely built with Blackmagic Design, which consisted of the original ATEM Television Studio live production switcher, HyperDeck Studio SSD recorder and SmartView Duo, dating back to 2012,” recalled Hu.
The company has also built a workstation with three DeckLink 8K Pro capture and playback cards and streaming software, which serves as a switcher for low-budget projects or a character generator when working with ATEM switchers.
SRTVMIX puts each of its live production systems in a flight case and equips the cases with temperature and noise control to further enhance reliability. “In April 2020, we started getting a great number of projects from government clients to facilitate work and business resumption after the outbreak of COVID-19. From April through July, we almost got to complete one project each week. With every project lasting three or four days plus rehearsals, our Blackmagic Design systems seemed to work around the clock but never failed us due to such high frequency uses,” recalled Hu.
“I got to know Blackmagic Design when I entered the TVC production field where DeckLink cards were really popular. DeckLink’s great functionalities, reliability and affordability have all been inherited by other Blackmagic products, allowing us to better serve our clients with our own advanced live production workflows,” Hu concluded.
Press Photography
Product photos of ATEM Constellation 8K, ATEM 1 M/E Advanced Panel, HyperDeck Studio 4K Pro, Teranex Mini, ATEM Constellation HD, Blackmagic Audio Monitor 12G, SmartView Duo, DeckLink 8K Pro and all other Blackmagic Design products are available at www.blackmagicdesign.com/media/images
About Blackmagic Design
Blackmagic Design creates the world’s highest quality video editing products, digital film cameras, color correctors, video converters, video monitoring, routers, live production switchers, disk recorders, waveform monitors and real time film scanners for the feature film, post production and television broadcast industries. Blackmagic Design’s DeckLink capture cards launched a revolution in quality and affordability in post production, while the company’s Emmy™ award winning DaVinci color correction products have dominated the television and film industry since 1984. Blackmagic Design continues ground breaking innovations including 6G-SDI and 12G-SDI products and stereoscopic 3D and Ultra HD workflows. Founded by world leading post production editors and engineers, Blackmagic Design has offices in the USA, UK, Japan, Singapore and Australia. For more information, please go to www.blackmagicdesign.com